How insecure does a battery have to be before it should be failed?

Q. How insecure does a battery have to be before it should be failed? A. The battery must be so insecure such that it is unrestrained and likely to fall...
Q. How insecure does a battery have to be before it should be failed? A. The battery must be so insecure such that it is unrestrained and likely to fall...
...part of an overall maintenance programme which helps maintain driver and operator road safety standards. If you are a tester or run an MOT garage, please encourage your van driver...
Q. Do I have to jack the rear of a Class 5 lightweight vehicle? A. Yes. Section 2.6 - Rear Suspension and Wheel Bearings applies to all vehicles other than...
...the noise. This is subsequently carried over into the MOT Inspection Manual. So if any visual lamp has failed and the clicking noise made by the flasher unit can be...
...the joint and arm needed replacing; the tyre too needed replacing The failure of the joint meant that the inner edge of the tyre was worn and the cords exposed....
DVSA has received reports of garages getting phonecalls from so-called 'VOSA' / 'DVSA' representatives offering broadband and internet services ahead of the switchover to the new MOT testing system in...
Back in August 2014, we limited the options for ‘item not tested’ on MOT comp to include only the mandatory measured items, eg brake performance, headlamp aim and emissions. Since...
...Ian found that both outer belts had been damaged. Someone had cut out the damaged areas and stapled the two parts back together using staples only suitable for paper. Ian...
...43,000 miles on the clock when presented for test. On inspection the rear brake pipes, including unions and brake hose ferrules, were heavily corroded and leaking fluid under pressure. It...
...enter test results. These new changes have been introduced based on the feedback we've received. It should make it easier to find and add defects and also remove defects when...